ollow these instructions to achieve the best results when applying High Quality DTF Transfers from PrintphoriaUSA.

Proper heat press settings are important for strong adhesion, durability, and long-lasting print quality.

---

Recommended Heat Press Settings

Temperature

300°F – 320°F

Press Time

10–15 Seconds

Pressure

Medium to Firm Pressure

Peel

Hot Peel or Warm Peel

---

Application Instructions

Step 1 – Prepare Garment

Pre-press the garment for 3–5 seconds to remove moisture and wrinkles.

---

Step 2 – Position Transfer

Place the DTF Transfer on the garment with the design facing upward in the desired location.

---

Step 3 – Press Transfer

Press using the recommended temperature, pressure, and time settings.

---

Step 4 – Peel Film

Allow the transfer to cool slightly, then peel the film smoothly.

---

Step 5 – Final Press

Cover the design with parchment paper, butcher paper, or a finishing sheet and press again for 5–10 seconds for a softer finish and improved durability.

---

Washing Instructions

For best results:

• Wash garments inside out
• Use cold water
• Tumble dry low or air dry
• Avoid bleach and harsh chemicals
• Do not iron directly on the design

Proper care helps extend the life of the print.

---

Important Notes

• Heat press settings may vary depending on equipment
• Always test settings before large production runs
• Uneven pressure or incorrect temperature may affect adhesion
• Use a quality heat press for best results

---

Need Help?

If you have questions about pressing instructions or transfer application, our team is here to help.

PrintphoriaUSA

📞 945-278-2879
📧 info@printphoriausa.com
🌐 PrintphoriaUSA